New Skymaster 1/6 Su-30SM
#227
Thread Starter
Last evening here at the Wingham airport, what a great week we had flying and being around close friends.
We had a number of nice jets here, but I must say I was impressed with the way the new Skymaster SU 30 and big Phantom preformed.
Doug Boyle from Jets North was a great help keeping all us equipped with the latest Kingtech engines, JR servos and Skymaster toys.
We had a number of nice jets here, but I must say I was impressed with the way the new Skymaster SU 30 and big Phantom preformed.
Doug Boyle from Jets North was a great help keeping all us equipped with the latest Kingtech engines, JR servos and Skymaster toys.
The following users liked this post:
CobraJet (09-10-2023)
#232
wow...wow...and wow!
#234
woow, it's fantastic!
#241
Yesterday just did maiden for my SKYMASTER SU-30 (no vector thrust).. perfect flying model and great size. From first day received model , I found quality and design is really next level even better than previous SM models. I loaded it with two 22kg turbines which already more than enough power there.. on the grass with full power took off about 50-60m with good speed , 65kg servos on stabs and rest all 45kgs..beatiful model easy to dismantle stabs , fins , wings , back tail …plane is 2.86m when remove nose and that long tail behind canards cant remove so they are 1060m wide … kind of big SUV or family van is ok to transport. I couldn't find anything negative on this plane but many positives … great plane ..
#243
note : this plane have two separate fuel tank than both goes to one 3.5L tank than two line goes out from one tank, this tank connects to UATs ..so when fuel up this plane cant refuel separately need to fuel from two lines together with T fitting... if you put this T fitting close to uat or inside the plane it cause in full speed two uat sucks fuel - air from each other .. for this reason I kept two fuel line from uat to out of plane than outside of the plane I use T fittings to refuel . which its together with my pump ..
#250
Thread Starter
the Su-30 CG (with the Canards) before front tube 25-32mm
the Su27 CG (without the canards) after front tube 5-12mm
Last edited by pilot tw; 09-29-2020 at 11:34 PM.