New Skymaster 1/6 Su-30SM
The following 2 users liked this post by pilot tw:
DenisFerrari (10-01-2020),
skunkwurk (10-01-2020)
The following users liked this post:
DenisFerrari (10-01-2020)
#257
#260
Thread Starter
Skymaster SU-30 1/6 Scale Twin Turbine Jet Flown by Ali Machinchy
#262
note : this plane have two separate fuel tank than both goes to one 3.5L tank than two line goes out from one tank, this tank connects to UATs ..so when fuel up this plane cant refuel separately need to fuel from two lines together with T fitting... if you put this T fitting close to uat or inside the plane it cause in full speed two uat sucks fuel - air from each other .. for this reason I kept two fuel line from uat to out of plane than outside of the plane I use T fittings to refuel . which its together with my pump ..
#263
My Feedback: (18)
I don't have this jet but my Shockwave has saddle tanks. I keep a hemostat in my box for this purpose, if I see a saddle tank filling a bit faster than the other I just pinch the line and allow the other to catch up. I use small pieces of tygon tubing on the tips of the hemostat in order to protect the tubing in the jet. Works great.
#264
i had this setup in my MIBO A10, first fill one side.. until you see fuel going out, then fill the other.. in the second tank filling you get the air out first... than the fuel.. and is done.
Easy !!!!!
Easy !!!!!
#268
Thread Starter
The following users liked this post:
DenisFerrari (11-02-2020)
#273
Thread Starter
The following users liked this post:
DenisFerrari (11-02-2020)
#274
Thread Starter
#275
The following users liked this post:
DenisFerrari (11-02-2020)